Tripak Grease
Tripak additive
Tripak Lube
Product Name:TP2122
Product ID:TRIPAK20150206005
Reference Quote:
Packing Size:
1. 180kg/barrel
2. 18kg/bucket
3. 9kg/bucket
4. 2kg/can(6cans/box)
5. 400g/tube
Detailed Introduction:

TP 2122 is a member of a family of technologically advanced greases. This technology is characterized by exceptional mechanical stability, high dropping point, high dropping point, high load carrying performance, reduced wear, and excellent resistance to water and corrosion. This technology equals and in many ways outperforms other premium, high temperature greases such as Lithium Complex, Aluminum Complex and Polyurea.

TP 2122 is a low viscosity synthetic formulation which offers superior performance over a wide operating temperature range. It can be sued in high speed bearings, sealed for life bearings, and in any extended life operating temperature range. It can be used in high speed bearings, and in extended life operation. It easily meets the requirements needed for NIGI GC/LB certification.


Thermal and Mechanical Stability

    ● Superior mechanical stability versus other thickeners, particularly in the presence of heat and water
    ● High dropping point, typically in excess of 300  ̊C

Corrosion Resistance

    ● Sulfonates are known and used for their excellent rust prevention properties
    ● This property is inherent in the thickener
    ● Will easily outperform all other technologies

Resistance to Water

    ● Excellent resistance to water washout

Load Carrying and Wear Protection

    ● Excellent EP and AW properties inherent in the thickener
    ● Does not require the use of additional additives

Oxidation Stability

    ● The use of premium antioxidants and a high viscosity Polyalphaolefin ensures excellent thermal stability
    ● Bearing life performance in excess of 200 hours

Low Temperature Properties

    ● Excellent mobility and torque at temperatures down to -40  ̊C

Typical Specifications:

NLGI grade ASTM D-217 2
Color   Tan
Dropping Point,  ̊C ASTM D-2265 318
60 strokes
10K strokes, % changed
10K strokes, with 50% water, % changed
ASTM D-217

Timken OK load, lbs (kg) ASTM D-2509 60 (27.2)
Four Ball EP
Weld, kg
Load Wear index
ASTM D-2596

Four Ball Wear, mm ASTM D-2266 0.42
Low Temperature Torque, -40  ̊C, Nm ASTM D-4693 2.5
Mobility at -18  ̊C g/min USS 9.0
Base Oil
Viscosity, cSt @ 100  ̊C
Viscosity, cSt @ 40  ̊C
ASTM D-445

免责条款 | 隐私政策 | 公司简介 | 联系我们
©2012-2019 上海长天荣实业有限公司 版权所有,并保留所有权利
上海市闵行区恒南路1328702室 Tel:021-54222038 Fax:021-54222036