Tripak Grease
Tripak additive
Tripak Lube
 
 
Product Name:TP2133
Brand:Tripak
Product ID:TRIPAK20150206007
Reference Quote:
Packing Size:
1. 180kg/barrel
2. 18kg/bucket
3. 9kg/bucket
4. 2kg/can(6cans/box)
5. 400g/tube
Detailed Introduction:

TP 2133 is a member of a family of technologically advanced greases. This technology is characterized by exceptional mechanical stability, high dropping point, high dropping point, high load carrying performance, reduced wear, and excellent resistance to water and corrosion. This technology equals and in many ways outperforms other premium, high temperature greases such as Lithium Complex, Aluminum Complex and Polyurea.

TP 2133 is a partial synthetic open gear grease. It is designed to provide superior load carrying capacity, spread-ability and pump-ability. It is well suited for use on heavily loaded gears on bucket shovels and draglines and performs well on swing racks, dipper sticks, and most other lubrication points on this equipment. It should only be used I slow speed, heavily loaded bearing.

Advantages:

Thermal and Mechanical Stability

    ● Superior mechanical stability versus other thickeners, particularly in the presence of heat and water
    ● High dropping point, typically in excess of 250  ̊C

Corrosion Resistance

    ● Sulfonates are known and used for their excellent rust prevention properties.
    ● This property is inherent in the thickener
    ● Will easily outperform all other technologies

Resistance to Water

    ● Formulated for enhanced adhesion and resistance to water

Load Carrying and Water Protection

    ● Excellent EP and AW properties inherent in the thickener
    ● Does not require the use of additional additives

Resistance to Oxidation

    ● Formulated with a patented oxidatively stable mineral oil.
    ● Life performance is typically increased by up to 4 times that of regular mineral oil formulations.

 

Typical Specifications:

NLGI grade ASTM D-217 1
Color   Black
Dropping Point,  ̊C ASTM D-2265 280
Penetration
60 strokes
10K strokes, % changed
10K strokes, with 50% water, % changed
ASTM D-217




325
2.2
7.7
Timken OK load, lbs (kg) ASTM D-2509 55 (25)
Four Ball EP
Weld, kg
Load Wear index
ASTM D-2596



65
500
Four Ball Wear, mm ASTM D-2266 0.42
Mobility at -18  ̊C g/min USS 6.6
Base Oil
Viscosity, cSt @ 100  ̊C
Viscosity, cSt @ 40  ̊C
ASTM D-445



19.5
227
Viscosity Index ASTM D-2270 98

 
 
免责条款 | 隐私政策 | 公司简介 | 联系我们
©2012-2019 上海长天荣实业有限公司 版权所有,并保留所有权利
上海市闵行区恒南路1328702室 Tel:021-54222038 Fax:021-54222036 E-mail:sales@changtianrong.com